Mounting Hardware is Included

This mount fits:
All XD Models that are NOT the Optics Ready Model
This includes, but is not limited to:
Springfield XD® MOD.2® – 3" SUB-COMPACT MODEL
Springfield XD® MOD.2® – 3.3" SUB-COMPACT MODEL
Springfield XD® MOD.2® – 4" SERVICE MODEL
Springfield XD® MOD.2® – 4" SERVICE MODEL THREADED BARREL
Springfield XD® MOD.2® – 5" TACTICAL MODEL
Springfield XD® 3" SUB-COMPACT MODEL
Springfield XD® 4" SERVICE MODEL
Springfield XD(M)® 3.8" COMPACT MODEL
Springfield XD(M)® 3.8" MODEL
Springfield XD(M)® 4.5" MODEL
Springfield XD(M)® 4.5" THREADED BARREL MODEL
Springfield XD-S® 3.3" MODEL
Springfield XD-E™ 3.3" SINGLE STACK
Springfield XD-E™ 3.8" SINGLE STACK

Does not fit:
Springfield XD(M)® 5.25" COMPETITION SERIES MODEL
Any Optics Ready

• Material: 7075 Aluminum
  Coating: Matte Black Hardcoat
  Overall Length: 1.604"
  Overall Width: .99"
  Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
  Red Dot Fitment:
  Vortex Defender-CCW 3 MOA Red Dot Sight
  Vortex Defender-CCW 6 MOA Red Dot Sight
  Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
  Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
  Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
  Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
  Crimson Trace CTS-1500
  Holosun 407K*
  Holosun 507K*
  Holosun EPS-GR*
  Holosun EPS-RD*
  Holosun EPS-Carry-GR*
  Holosun EPS-Carry-RD*
  Jpoint
  Leupold Delta Point Pro
  Optima
  Redfield Accelerator
  Shield RMS
  Shield RMSc
  Shield SMS
  Sig Romeo Zero
  (*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

  Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

• Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
  
  Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
  
  Installation Instructions
  - Remove the rear sight*
  - Install the EGW Sight Mount in the dovetail
  - Tighten set screw (if applicable)
  - Place the red dot sight on the EGW Sight Mount
  (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
  - Apply blue Loctite to the provided mounting screws
  - Torque mounting screws to 15in/lbs
  
  Modification of your firearm may nullify the manufacturer's warranty.
  This product should be installed and checked by a qualified gunsmith.
  No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
  
  Click here to see a video from Vortex on how to install our red dot base on a slide.
   

  Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.604"
Overall Width: .99"
Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot Fitment:
Vortex Defender-CCW 3 MOA Red Dot Sight
Vortex Defender-CCW 6 MOA Red Dot Sight
Bushnell RXS-100 Requires 6-32 x 3/8" SHCS
Bushnell RXC-200 Requires 6-32 x 3/8" SHCS
Bushnell RXU-200 Requires 6-32 x 3/8" Flat Head Screws
Bushnell RXS-250 Requires 6-32 x 3/8" SHCS
Crimson Trace CTS-1500
Holosun 407K*
Holosun 507K*
Holosun EPS-GR*
Holosun EPS-RD*
Holosun EPS-Carry-GR*
Holosun EPS-Carry-RD*
Jpoint
Leupold Delta Point Pro
Optima
Redfield Accelerator
Shield RMS
Shield RMSc
Shield SMS
Sig Romeo Zero
(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.